Sale!

Packard 4 Watt Cast Iron Unit Bearing Motor 115 Volts CW 1550 RPM

$83.51

Packard 4 Watt Cast Iron Unit Bearing Motor 115 Volts CW 1550 RPM

  • Single Foot Pad
  • 3 Drilled & Tapped Holes in Rear of the Motor
  • Rotation is Determined by Viewing the Lead End
  • Totally Enclosed
  • Mounting Hardware Included
  • 60 Hz
Amps 0.29
Rotation CW
RPM 1550
Enclosure Totally Enclosed
Material Cast Iron
Mounting Single Foot Pad
Shaft Length (In.) 1/2
Threaded Shaft 1/4 x 20
Motor Type Shaded Pole
Shaft Diameter (In.) 1/4
Shafts 1
Hertz 60/50
Shaft Dimension (In.) 1/4 x 1/2
Watts 4
Length Less Shaft (In.) 2-3/8
Voltage 115
GE 5211
Industry No. 5211
Industry No. PGMCA1041

 

Subtotal:

Add-ons total:

Total:

$0.00

WOULD YOU LIKE TO MODIFY / WIRE AND PRE-TEST THIS ITEM?

:

$0.00
?Shipped without changing voltage. If the motor has more than one voltage capability, the highest voltage is factory configuration (ex: 115/208 motor = 208-volt setup and shipped). *WE WILL CONTACT YOU PROMPTLY IF THE VOLTAGE SELECTED IS NOT APPLIABLE WITH THE PRODUCT PURCHASED*
?Also known as 100, 110, 115, 120-volt single phase
?Also known as 208, 220, 230, 240-volt single phase
?Also known as 208, 220, 230, 240-volt three-phase
?Also known as 460, and 480-volt three-phase
Clear selection
$0.00

3. SELECT your PLUG type (socket-connection, etc.) below:

$0.00

THIS PRODUCT INCLUDES A ONE-YEAR MANUFACTURER’S WARRANTY.

  • (added) MODIFICATION Cost: $0.00
  • (original) PRODUCT Cost: $83.51
  • Subtotal: $0.00

Description

Packard 4 Watt Cast Iron Unit Bearing Motor 115 Volts CW 1550 RPM

  • Single Foot Pad
  • 3 Drilled & Tapped Holes in Rear of the Motor
  • Rotation is Determined by Viewing the Lead End
  • Totally Enclosed
  • Mounting Hardware Included
  • 60 Hz
Amps 0.29
Rotation CW
RPM 1550
Enclosure Totally Enclosed
Material Cast Iron
Mounting Single Foot Pad
Shaft Length (In.) 1/2
Threaded Shaft 1/4 x 20
Motor Type Shaded Pole
Shaft Diameter (In.) 1/4
Shafts 1
Hertz 60/50
Shaft Dimension (In.) 1/4 x 1/2
Watts 4
Length Less Shaft (In.) 2-3/8
Voltage 115
GE 5211
Industry No. 5211
Industry No. PGMCA1041

 

All motors include a one year warranty. Must have certification or license to install electrical components and products. All information, and proven certifications must be emailed to support@allaroundindustrysupply.com Warranty does not cover freight, damages to outside parts, components, or ramifications of defective motor. Warranty does not cover labor.