Sale!

56Y FR 3 Ph. Condenser Fan/Heat Pump Motor, 1 HP, 1140 RPM, 200-230/460 V

$478.86

56Y FR 3 Ph. Condenser Fan/Heat Pump Motor, 1 HP, 1140 RPM, 200-230/460 V

  • 200-230/460 Volt
  • 5/8″ Dia. x 5″ Long Shaft with Flat and Keyway
  • 4 Locating Screws 90 Degrees Apart, 3.33″ From Outer Edge of Shaft Slinger
  • Hubs on Both Ends Will Accept Resilient Base Kits
  • External Shaft Slinger
  • 70°C Ambient
  • Enclosed Shaft End Bracket, Vented Frame
  • Automatic Reset Thermal Protector
  • 60/50 Hz
  • Double Sealed Ball Bearings
  • Threaded Lead Exit
  • Patented VCD™ Voltage Change Device
  • UL Recognized and CSA Certified
H.P. 1
RPM 1140
Enclosure Open
F/L Inductive Amps 4.0-4.2/2.1
Mounting Belly Band or Resilient Ring
Frame 56Y
Phase 3
Hertz 60
Shaft Dimension (In.) 5/8 x 5
Length Less Shaft (In.) 10.06
Type Three Phase
Voltage 200 – 230/460
Weight (lbs.) 29
Mars 10502
Nidec 1818H

 

Subtotal:

Add-ons total:

Total:

$0.00

WOULD YOU LIKE TO MODIFY / WIRE AND PRE-TEST THIS ITEM?

:

$0.00
?Shipped without changing voltage. If the motor has more than one voltage capability, the highest voltage is factory configuration (ex: 115/208 motor = 208-volt setup and shipped). *WE WILL CONTACT YOU PROMPTLY IF THE VOLTAGE SELECTED IS NOT APPLIABLE WITH THE PRODUCT PURCHASED*
?Also known as 100, 110, 115, 120-volt single phase
?Also known as 208, 220, 230, 240-volt single phase
?Also known as 208, 220, 230, 240-volt three-phase
?Also known as 460, and 480-volt three-phase
Clear selection
$0.00

3. SELECT your PLUG type (socket-connection, etc.) below:

$0.00

THIS PRODUCT INCLUDES A ONE-YEAR MANUFACTURER’S WARRANTY.

  • (added) MODIFICATION Cost: $0.00
  • (original) PRODUCT Cost: $478.86
  • Subtotal: $0.00

Description

56Y FR 3 Ph. Condenser Fan/Heat Pump Motor, 1 HP, 1140 RPM, 200-230/460 V

  • 200-230/460 Volt
  • 5/8″ Dia. x 5″ Long Shaft with Flat and Keyway
  • 4 Locating Screws 90 Degrees Apart, 3.33″ From Outer Edge of Shaft Slinger
  • Hubs on Both Ends Will Accept Resilient Base Kits
  • External Shaft Slinger
  • 70°C Ambient
  • Enclosed Shaft End Bracket, Vented Frame
  • Automatic Reset Thermal Protector
  • 60/50 Hz
  • Double Sealed Ball Bearings
  • Threaded Lead Exit
  • Patented VCD™ Voltage Change Device
  • UL Recognized and CSA Certified
H.P. 1
RPM 1140
Enclosure Open
F/L Inductive Amps 4.0-4.2/2.1
Mounting Belly Band or Resilient Ring
Frame 56Y
Phase 3
Hertz 60
Shaft Dimension (In.) 5/8 x 5
Length Less Shaft (In.) 10.06
Type Three Phase
Voltage 200 – 230/460
Weight (lbs.) 29
Mars 10502
Nidec 1818H

 

All motors include a one year warranty. Must have certification or license to install electrical components and products. All information, and proven certifications must be emailed to [email protected] Warranty does not cover freight, damages to outside parts, components, or ramifications of defective motor. Warranty does not cover labor.