Description
CONTACT CUSTOMER SERVICE FOR PRICE AND LEAD TIME.
!!! INSURE THE APPLICATION TESTS FOR THE CORRECT VOLTAGE, CYCLE, AND PHASE BEFORE PURCHASING !!!
210 MHB Industrial Material Handler Backplated Radial Blade Belt Driven Single Width, Single Inlet
210MHB Industrial Material Handler Backplated Radial Blade Belt Driven Single Width, Single Inlet
210-MHB Industrial Material Handler Backplated Radial Blade Belt Driven Single Width, Single Inlet
MHB210 Industrial Material Handler Backplated Radial Blade Belt Driven Single Width, Single Inlet
MHB-210 Industrial Material Handler Backplated Radial Blade Belt Driven Single Width, Single Inlet
MHB 210 Industrial Material Handler Backplated Radial Blade Belt Driven Single Width, Single Inlet
REPLACEMENT MOTOR SINGLE PHASE 115 VOLT: Please email or call for pricing
REPLACEMENT MOTOR THREE PHASE: Please email or call for pricing
REPLACEMENT BEARINGS: Please email of call for pricing
REPLACEMENT SHAFT: Please call or email for pricing
REPLACEMENT BLADE: Please email or call for pricing
REPLACEMENT TOPCAP/LID: Please email or call for pricing
CONTACT CUSTOMER SERVICE FOR PRICE AND LEAD TIME.
MHB
Industrial Material Handler Backplated Radial Blade
Belt Driven
Single Width, Single Inlet
- The MHB is used for conveying long, stringy, or fibrous materials. This impeller construction will not allow paper shreddings, threads, etc. to wrap around the hub and blades. Available in standard and heavy duty designs.
Description: Fan shall be a single width, single inlet backplated radial blade, belt driven industrial material handler.
Certifications: Fan shall be manufactured at an ISO 9001 certified facility. Fan shall be Underwriters Laboratories Classified (as to electrical shock and mechanical hazards only) and CSA Certified (Standard 113-M1984). Fan shall bear the AMCA certified ratings seal for air performance.
Construction: The fan shall be of bolted and welded construction utilizing corrosion resistant fasteners. The scroll wrapper and scroll side panels shall be a minimum 10 gauge steel. The entire fan housing shall have continuously welded seams for leakproof operation and shall be field rotatable to any one of eight discharge positions. Housing side panels shall be rigidly reinforced using structural steel to prevent flexing and vibration at high pressures. Bearing support shall be minimum 1/4″ welded steel. Lifting lugs shall be provided for ease of installation. Unit shall bear an engraved aluminum nameplate and shall be shipped in ISTA certified transit tested packaging.
Coating: All steel fan components shall be Lorenized™ with an electrostatically applied, baked polyester powder coating. Each component shall be subject to a five stage environmentally friendly wash system, followed by a minimum 2 mil thick baked powder finish. Paint must exceed 1,000 hour salt spray under ASTM B117 test method.
Wheel: Wheel shall be steel, backplated radial blade type. Blades shall be minimum 7 gauge steel continuously welded to the hub, aerodynamic gusset and minimum 1/4” backplate. Hubs shall be keyed and securely attached to the fan shaft utilizing four setscrews. Wheel shall be balanced in accordance with AMCA Standard 204-05, Balance Quality and Vibration Levels for Fans.