Description
CONTACT CUSTOMER SERVICE FOR PRICE AND LEAD TIME.
!!! INSURE THE APPLICATION TESTS FOR THE CORRECT VOLTAGE, CYCLE, AND PHASE BEFORE PURCHASING !!!
REPLACEMENT MOTOR SINGLE PHASE 115 VOLT: Please email or call for pricing
REPLACEMENT MOTOR THREE PHASE: Please email or call for pricing
REPLACEMENT BEARINGS: Please email of call for pricing
REPLACEMENT SHAFT: Please call or email for pricing
REPLACEMENT BLADE: Please email or call for pricing
REPLACEMENT TOPCAP/LID: Please email or call for pricing
CONTACT CUSTOMER SERVICE FOR PRICE AND LEAD TIME.
TMX
Mixed-Flow
Inline Blower
Low Pressure
- Adjustable mounting feet on all horizontal units allows the motor position and floor/ceiling orientation to be easily adjusted in the field without additional parts or welding.
- Universal mounting brackets are included on both the inlet and discharge of vertical units to allow for ceiling or floor mounting in either an upblast or downblast configuration.
- Lifting lugs are integrated into mounting feet.
- Access door is standard.
Description: Fan shall be a belt driven, tubular mixed-flow inline blower.
Certifications: Fan shall be manufactured at an ISO 9001 certified facility. Fan shall be listed by Underwriters Laboratories (UL/cUL 705). Fan shall bear the AMCA Certified Ratings Seal for Sound and Air Performance. Performance shall be licensed for both inlet and outlet sound.
Construction: The fan shall be of bolted construction utilizing corrosion resistant fasteners. Housing shall be minimum 14 gauge galvanized steel. Straightening vanes shall be included to assure maximum efficiency and low noise levels. Adjustable motor plate shall utilize threaded studs for positive belt tensioning. Extended lube lines shall be furnished for lubrication of fan bearings. Lifting lugs shall be provided for ease of installation. Adjustable mounting feet shall allow field adjustment of motor position. Unit shall bear an engraved aluminum nameplate. Nameplate shall indicate design CFM, static pressure, and maximum fan RPM. Unit shall be shipped in ISTA certified transit tested packaging.
Wheel: Wheel shall be constructed of 100% aluminum, non-overloading, high efficiency mixed-flow type. Contoured single thickness blades shall incorporate 3-D curvature for maximum efficiency across the entire surface of the blade. Wheel shall including a precision machined cast aluminum hub. Hub shall be keyed and securely attached to the fan shaft. Wheel shall overlap an aerodynamic aluminum inlet cone to provide maximum performance and efficiency. Wheel shall be balanced in accordance with AMCA Standard 204-05, Balance Quality and Vibration Levels for Fans.