SER150 Fantech Side Duct Fresh Air Appliance

$1,649.69

• Airflow up to 145 cfm @ 0.4″ Ps serves 2 to 5 bedroom homes • Removable screw terminal for easy connection • Compatible with Fantech’s low-voltage controls • Three speed ventilation control • Washable electrostatic filters • Optional drain line • Anti-microbial material • Withstands freezing • AHRI certified Application Fantech’s SER 150 is an Energy Recovery Ventilator designed for higher static pressure applications. How it works The unit brings a continuous supply of fresh air into a home while exhausting an equal amount of contaminated air. The energy recovery core at the center of the unit transfers heat and moisture from incoming air to the outgoing air that was cooled and dried by the building’s air conditioner. Note: If you are using the appliance for a simplified installation, i.e. connecting appliance’s supply air duct to a furnace’s return air duct, the appliance must operate continuously. In case it is turned off, the furnace will continue to draw in outdoor air directly into the furnace without re-heating or re-cooling. If the appliance is installed such that the homeowner may turn it off during the cold or hot seasons, we recommend installing a motorized damper ADC between the appliance’s supply air and the furnace’s return air duct that closes when the appliance is not operating.
Amps 1.4
Brand Fantech
Country of Origin CANADA
Hertz 60
Phase Single
Voltage 120

Subtotal:

Add-ons total:

Total:

$0.00

WOULD YOU LIKE TO MODIFY / WIRE AND PRE-TEST THIS ITEM?

:

$0.00
?Shipped without changing voltage. If the motor has more than one voltage capability, the highest voltage is factory configuration (ex: 115/208 motor = 208-volt setup and shipped). *WE WILL CONTACT YOU PROMPTLY IF THE VOLTAGE SELECTED IS NOT APPLIABLE WITH THE PRODUCT PURCHASED*
?Also known as 100, 110, 115, 120-volt single phase
?Also known as 208, 220, 230, 240-volt single phase
?Also known as 208, 220, 230, 240-volt three-phase
?Also known as 460, and 480-volt three-phase
Clear selection
$0.00

3. SELECT your PLUG type (socket-connection, etc.) below:

$0.00

THIS PRODUCT INCLUDES A ONE-YEAR MANUFACTURER’S WARRANTY.

  • (added) MODIFICATION Cost: $0.00
  • (original) PRODUCT Cost: $1,649.69
  • Subtotal: $0.00
Categories: ,

Description

• Airflow up to 145 cfm @ 0.4″ Ps serves 2 to 5 bedroom homes • Removable screw terminal for easy connection • Compatible with Fantech’s low-voltage controls • Three speed ventilation control • Washable electrostatic filters • Optional drain line • Anti-microbial material • Withstands freezing • AHRI certified Application Fantech’s SER 150 is an Energy Recovery Ventilator designed for higher static pressure applications. How it works The unit brings a continuous supply of fresh air into a home while exhausting an equal amount of contaminated air. The energy recovery core at the center of the unit transfers heat and moisture from incoming air to the outgoing air that was cooled and dried by the building’s air conditioner. Note: If you are using the appliance for a simplified installation, i.e. connecting appliance’s supply air duct to a furnace’s return air duct, the appliance must operate continuously. In case it is turned off, the furnace will continue to draw in outdoor air directly into the furnace without re-heating or re-cooling. If the appliance is installed such that the homeowner may turn it off during the cold or hot seasons, we recommend installing a motorized damper ADC between the appliance’s supply air and the furnace’s return air duct that closes when the appliance is not operating.
Amps 1.4
Brand Fantech
Country of Origin CANADA
Hertz 60
Phase Single
Voltage 120