Sale!

GN180 Loren Cook Restroom Exhaust Fan

$330.51

!!! INSURE THE APPLICATION TESTS FOR THE CORRECT VOLTAGE, CYCLE, AND PHASE BEFORE PURCHASING !!!

GN180 Ceiling Exhaust Fan

115 volt / 1 phase ( three phase applications available as well)

180 Series Bathroom Exhaust Fan

Subtotal:

Add-ons total:

Total:

Do you need any accessories?

$0.00

WOULD YOU LIKE TO MODIFY / WIRE AND PRE-TEST THIS ITEM?

:

$0.00
?Shipped without changing voltage. If the motor has more than one voltage capability, the highest voltage is factory configuration (ex: 115/208 motor = 208-volt setup and shipped). *WE WILL CONTACT YOU PROMPTLY IF THE VOLTAGE SELECTED IS NOT APPLIABLE WITH THE PRODUCT PURCHASED*
?Also known as 100, 110, 115, 120-volt single phase
?Also known as 208, 220, 230, 240-volt single phase
?Also known as 208, 220, 230, 240-volt three-phase
?Also known as 460, and 480-volt three-phase
Clear selection
$0.00

3. SELECT your PLUG type (socket-connection, etc.) below:

$0.00

THIS PRODUCT INCLUDES A ONE-YEAR MANUFACTURER’S WARRANTY.

  • (added) MODIFICATION Cost: $0.00
  • (original) PRODUCT Cost: $330.51
  • Subtotal: $0.00

Description

!!! INSURE THE APPLICATION TESTS FOR THE CORRECT VOLTAGE, CYCLE, AND PHASE BEFORE PURCHASING !!!

GN180 Ceiling Exhaust Fan

115 volt / 1 phase ( three phase applications available as well)

180 Series Bathroom Exhaust Fan

Gemini fans provide maximum performance, durability, and ease of installation in a wide variety of ceiling (GC) and inline (GN) clean air exhaust applications.
There is a range of sizes, all with direct drive motors, in either single wide or double wide construction.
Also, Gemini fans are easily field convertible from ceiling to inline or inline to ceiling, depending on the installation needs.

Gemini GN-180

Inline Fans:

30 – 260 CFM
0 – 1.0” SP

Description: Fan shall be inline mounted, direct drive, centrifugal exhaust fan.

Certifications: Fan shall be manufactured by an ISO 9001 certified company. Fan shall be listed by Underwriters Laboratories (UL 705) and UL listed for Canada (cUL 705). Fan shall bear the AMCA Certified Ratings Seal for sound and air performance.

Construction: Fan wheel housing and integral outlet duct collar shall be injection molded from a specially engineered resin exceeding UL requirements for smoke and heat generation. The outlet duct shall have provision for an aluminum backdraft damper with continuous aluminum hinge rod. The inlet box shall be minimum 22 gauge galvanized steel. Motor shall be isolation mounted to a one piece galvanized stamped steel integral motor mount/inlet. A field wiring compartment with disconnect receptacle shall be standard. To accommodate different mounting positions, an adjustable prepunched mounting bracket shall be provided. Unit shall be shipped in ISTA Certified Transit Tested Packaging.

Wheel: Wheel shall be centrifugal forward curved type, injection molded of polypropylene resin. Wheel shall be balanced in accordance with AMCA Standard 204-05, Balance Quality and Vibration Levels for Fans.

Motor: Motor shall be permanent split capacitor with permanently lubricated sealed bearings and include impedance or thermal overload protection and disconnect plug. Motor shall be furnished at the specified voltage and phase.

Product: Fan shall be model Gemini GN 126 – 188 as manufactured by LOREN COOK COMPANY of Springfield, Missouri.

LOREN COOK COMPANY certifies that the Gemini GN 126-188 are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311, and comply with requirements of the AMCA Certified Ratings Program.


Type Gemini GN 126 – 188 are furnished standard with UL 705 & cUL 705 listing (Power Ventilator/ZACT).

All sizes are available with express service.

All fans include a one year warranty. Must have certification or license to install electrical components and products. All information, and proven certifications must be emailed to support@allaroundindustrysupply.com Warranty does not cover freight, damages to outside parts, components, or ramifications of defective parts external to the fan. Warranty does not cover labor or additional cost associated with installation, repair, or injury.