Description
“G” Series Double Inlet Belt Drive Blower.
Capacity range 200 to 8000 CFM.
Blower units come complete with housing, bearings, wheel, shaft, and motor mounting bracket.
The blower wheel has an exclusive centre disc which allows Delhi blowers to be used safely at speeds well above any normal requirement.
Available with permanently lubricated sleeve bearings suitable for operation in ambient temperatures of +30 to +120 degrees F and under 1000 RPM or ball bearings with a sealed lifetime supply of lubricant for operation in ambient temperatures of -65 to
+250 degrees F.
Shaft dimensions and finish are carefully controlled to ensure quiet, trouble free operation.
Delhi G9 x 3/4″ Blower Assembly is commonly used by many supply fan manufacturers.
- OEM replacement for Delhi Blowers part # 9005421 or 9005021 with 3/4″ shaft.
- Ball bearing model.
- Base feet can be mounted for various discharge positions.
- Motor mounting hardware included with each blower.
- Corrosion resistant G90 galvanized steel blower housing.
- The blower wheel has an exclusive center disc which allows blowers to be used safely at speeds well above any normal requirement.
- Blower housings have extruded holes to give greater holding power for mounting base sides and motor bracket.
- Matte finish zinc coated wheel and cut-off baffle.
- Shaft dimensions and finish are carefully controlled to ensure quiet, trouble free operation.
- Delhi Blowers is a Canarm Brand.
Blower size: G-9
Delhi Model No.: 9005021
Shaft Size: 3/4″
