Sale!

9005421 Delhi G9 Blower Assembly

9005041 Delhi G10 Blower Assembly9005021 Delhi G9 Blower Assembly

$375.51

“G” Series Double Inlet Belt Drive Blower.

Capacity range 200 to 8000 CFM.
Blower units come complete with housing, bearings, wheel, shaft, and motor mounting  bracket.
The blower wheel has an exclusive centre disc which allows Delhi blowers to be used safely at speeds well above any normal requirement.
Available with permanently lubricated sleeve bearings suitable for operation in ambient temperatures of +30 to +120 degrees F and under 1000 RPM or ball bearings with a sealed lifetime supply of lubricant for operation in ambient temperatures of -65 to
+250 degrees F.

Subtotal:

Add-ons total:

+ 

Total:

$0.00
$0.00
$0.00
$0.00

Do you need any accessories?

$0.00

WOULD YOU LIKE TO MODIFY / WIRE AND PRE-TEST THIS ITEM?

:

$0.00
?Shipped without changing voltage. If the motor has more than one voltage capability, the highest voltage is factory configuration (ex: 115/208 motor = 208-volt setup and shipped). *WE WILL CONTACT YOU PROMPTLY IF THE VOLTAGE SELECTED IS NOT APPLIABLE WITH THE PRODUCT PURCHASED*
?Also known as 100, 110, 115, 120-volt single phase
?Also known as 208, 220, 230, 240-volt single phase
?Also known as 208, 220, 230, 240-volt three-phase
?Also known as 460, and 480-volt three-phase
Clear selection
$0.00

3. SELECT your PLUG type (socket-connection, etc.) below:

$0.00

THIS PRODUCT INCLUDES A ONE-YEAR MANUFACTURER’S WARRANTY.

  • (added) MODIFICATION Cost: $0.00
  • (original) PRODUCT Cost: $375.51
  • Subtotal: $0.00
Click here for a formal quote
Category:

Description

“G” Series Double Inlet Belt Drive Blower.

 Capacity range 200 to 8000 CFM.
Blower units come complete with housing, bearings, wheel, shaft, and motor mounting  bracket.
The blower wheel has an exclusive centre disc which allows Delhi blowers to be used safely at speeds well above any normal requirement.
Available with permanently lubricated sleeve bearings suitable for operation in ambient temperatures of +30 to +120 degrees F and under 1000 RPM or ball bearings with a sealed lifetime supply of lubricant for operation in ambient temperatures of -65 to
+250 degrees F.
Shaft dimensions and finish are carefully controlled to ensure quiet, trouble free operation.

Delhi G9 x 3/4″ Blower Assembly is commonly used by many supply fan manufacturers

  • Ball bearing model.
  • Base feet can be mounted for various discharge positions.
  • Motor mounting hardware included with each blower.
  • Corrosion resistant G90 galvanized steel blower housing.
  • The blower wheel has an exclusive center disc which allows blowers to be used safely at speeds well above any normal requirement.
  • Blower housings have extruded holes to give greater holding power for mounting base sides and motor bracket.
  • Matte finish zinc coated wheel and cut-off baffle.
  • Shaft dimensions and finish are carefully controlled to ensure quiet, trouble free operation.
  • Delhi Blowers is a Canarm Brand.
        Blower size: G-9
       Delhi Model No.: 9005421
      Shaft Size: 3/4″

LOOKING FOR THE OTHER REPLACEMENT PARTS FOR YOUR UNIT? PLEASE FILL OUT THE CONTACT FORM ON THE LEFT AND WE WOULD BE HAPPY TO HELP!

All blowers include a one year warranty.  All information, and proven certifications must be emailed to support@allaroundindustrysupply.com Warranty does not cover freight, damages to outside parts, components, or ramifications of defective blower. Warranty does not cover labor. 

Blower size: G-9 

Delhi Model No.: 9005421
 
 
Shaft Size: 3/4"
 
 

All blowers include a one year warranty. All information, and proven certifications must be emailed to support@allaroundindustrysupply.com Warranty does not cover freight, damages to outside parts, components, or ramifications of defective blower. Warranty does not cover labor. 

Related products