Sale!

5K004 Dayton OEM Replacement Motor

$224.93

  • HVAC Motor, Shaded Pole, Totally Enclosed Fan-Cooled, 1/20 HP, 1550 Nameplate RPM, 115 Voltage, 3.3 Frame, Service Factor 1.0, Full Load Amps 2.0, 60 Hz, Rotation CWSE, Insulation Class B, Max. Ambient Temp. 40 Degrees C, Number of Speeds 1, Mounting Stud, Ball Bearings, Thermal Protection Auto, Body Dia. 4.4 In., Shaft Dia. 5/16 In., Shaft Length 2 In., 4-1/4 In., 4/SE, 2 x 2 In., 1

Subtotal:

Add-ons total:

Total:

$0.00
*Pitched roof curbs and wooden nailer curbs add 5 business days to the lead time*
$0.00
$0.00
** Hinges are mainly used in grease laden applications*
$0.00
$0.00
$0.00

WOULD YOU LIKE TO MODIFY / WIRE AND PRE-TEST THIS ITEM?

$0.00
?Shipped without changing voltage. If the motor has more than one voltage capability, the highest voltage is factory configuration (ex: 115/208 motor = 208-volt setup and shipped). *WE WILL CONTACT YOU PROMPTLY IF THE VOLTAGE SELECTED IS NOT APPLIABLE WITH THE PRODUCT PURCHASED*
?Also known as 100, 110, 115, 120-volt single phase
?Also known as 208, 220, 230, 240-volt single phase
?Also known as 208, 220, 230, 240-volt three-phase
?Also known as 460, and 480-volt three-phase
Clear selection
$0.00

3. SELECT your PLUG type (socket-connection, etc.) below:

$0.00

THIS PRODUCT INCLUDES A ONE-YEAR MANUFACTURER’S WARRANTY.

  • (added) MODIFICATION Cost: $0.00
  • (original) PRODUCT Cost: $224.93
  • Subtotal: $0.00

Description

  • HVAC Motor, Shaded Pole, Totally Enclosed Fan-Cooled, 1/20 HP, 1550 Nameplate RPM, 115 Voltage, 3.3 Frame, Service Factor 1.0, Full Load Amps 2.0, 60 Hz, Rotation CWSE, Insulation Class B, Max. Ambient Temp. 40 Degrees C, Number of Speeds 1, Mounting Stud, Ball Bearings, Thermal Protection Auto, Body Dia. 4.4 In., Shaft Dia. 5/16 In., Shaft Length 2 In., 4-1/4 In., 4/SE, 2 x 2 In., 1

 

  • ItemHVAC Motor
  • Motor ApplicationHVAC/R
  • Motor Sub ApplicationDirect Drive Fan/Blower
  • Motor DesignShaded Pole
  • Motor Enclosure DesignTotally Enclosed Fan-Cooled
  • DutyContinuous
  • HP1/20
  • Nameplate RPM1550
  • Voltage115
  • Frame3.3
  • Motor Service Factor1.00
  • Full Load Amps1.8
  • Hz60
  • Motor Shaft RotationCWSE
  • Ins. ClassB
  • Max. Ambient Temp.40 Degrees C
  • No. of Speeds1
  • Motor Mounting TypeStud
  • Motor BearingsBall
  • Motor Thermal ProtectionAuto
  • Body Dia.4″
  • Shaft Dia.5/16″
  • Shaft Length2-1/4″
  • Length Less Shaft4-1/4″
  • Mounting Stud Location4/Shaft End
  • Stud/Base Mtg. Pattern2 x 2″
  • Phase1
  • ApplicationOEM and Replacement Use In A Wide Variety of Fan and Blower
  • RPM Range1501-1600
  • Mounting Pattern2 x 2

dayton-5k004d-dimensional-drawing

 

All motors include a one year warranty. Must have certification or license to install electrical components and products. All information, and proven certifications must be emailed to [email protected] Warranty does not cover freight, damages to outside parts, components, or ramifications of defective motor. Warranty does not cover labor.