32AFB-H Tube Axial Fan High Temperature Belt Drive

$0.00

CONTACT CUSTOMER SERVICE FOR PRICE AND LEAD TIME. 

!!! INSURE THE APPLICATION TESTS FOR THE CORRECT VOLTAGE, CYCLE, AND PHASE BEFORE PURCHASING !!!

Three phase applications available as well

32AFB-H Tube Axial Fan High Temperature Belt Drive

32AFBV-H

Loren Cook Model #: AFBV-H32

AFB-32

REPLACEMENT MOTOR SINGLE PHASE 115 VOLT: Please email or call for pricing

REPLACEMENT MOTOR THREE PHASE: Please email or call for pricing

REPLACEMENT BEARINGS: Please email of call for pricing

REPLACEMENT SHAFT: Please call or email for pricing

REPLACEMENT BLADE: Please email or call for pricing

REPLACEMENT TOPCAP/LID: Please email or call for pricing

 

CONTACT CUSTOMER SERVICE FOR PRICE AND LEAD TIME.

Subtotal:

Add-ons total:

Total:

Description

CONTACT CUSTOMER SERVICE FOR PRICE AND LEAD TIME. 

!!! INSURE THE APPLICATION TESTS FOR THE CORRECT VOLTAGE, CYCLE, AND PHASE BEFORE PURCHASING !!!

Three phase applications available as well

32AFB-H Tube Axial Fan High Temperature Belt Drive

32AFBV-H

Loren Cook Model #: AFBV-H32

AFB-32

REPLACEMENT MOTOR SINGLE PHASE 115 VOLT: Please email or call for pricing

REPLACEMENT MOTOR THREE PHASE: Please email or call for pricing

REPLACEMENT BEARINGS: Please email of call for pricing

REPLACEMENT SHAFT: Please call or email for pricing

REPLACEMENT BLADE: Please email or call for pricing

REPLACEMENT TOPCAP/LID: Please email or call for pricing

 

CONTACT CUSTOMER SERVICE FOR PRICE AND LEAD TIME. 

 

 

AFB-H/AFBV-H

Tube Axial Fan
High Temperature
Belt Drive

Description: Fan shall be a belt drive, high temperature, fixed pitch, tube axial fan.

Certifications: Fan shall be manufactured at an ISO 9001 certified facility. Fan shall be listed by Underwriters Laboratories (UL 705) and UL listed for Canada (cUL 705).

Construction: Fan shall be of bolted and welded construction utilizing corrosion resistant fasteners, and suitable for up to 500oF continuous operating temperature. Housing shall be minimum 12 gauge steel with continuously welded seam and integral inlet and outlet flanges pre-punched for mounting. Copper lube lines shall be extended from the bearings to the outside of the housing. Adjustable motor plate shall be attached to a welded motor sub-base and shall utilize threaded studs for positive belt tensioning. Unit shall bear an engraved aluminum nameplate. Nameplate shall indicate design CFM, static pressure and maximum fan RPM.

Coating: All steel fan components shall be coated with a heat resistant silicon-alkyd resin.

Propeller: Propeller shall be fixed pitch, welded steel six blade airfoil design. The propeller shall be keyed and secured to the shaft with a split taper bushing and retaining plate. Propeller shall be balanced in accordance with AMCA Standard 204-05, Balance Quality and Vibration Levels for Fans, Category BV-3.

Motor: Motor shall be heavy duty type furnished at the specified voltage, phase and enclosure.

Bearings: Bearings are designed and tested specifically for use in air handling applications. Bearings are heavy duty regreasable ball or roller type in a cast iron pillow block housing selected for a minimum L50 life in excess of 400,000 hours for horizontal units and L50 life in excess of 250,000 hours for vertical units at maximum cataloged operating speed.

Shaft: Fan shaft shall be AISI C-1045 hot rolled and accurately turned, ground and polished. Shafting shall be sized for a critical speed of at least 125 percent of maximum RPM.

Belts and Drives: Belts shall be oil and heat resistant, static conducting. Drives shall be precision machined cast iron type, keyed and securely attached to the wheel and motor shafts. Drives shall be sized for 150 percent of the installed motor horsepower. The variable pitch motor drive must be factory set to the specified fan RPM.

 

Model AFB-H/AFBV-H are furnished standard with UL 705 and CUL 705 listing (Power Ventilator) when furnished with factory supplied motor.

REPLACEMENT MOTOR SINGLE PHASE 115 VOLT: Please email or call for pricing

REPLACEMENT MOTOR THREE PHASE: Please email or call for pricing

REPLACEMENT BEARINGS: Please email of call for pricing

REPLACEMENT SHAFT: Please call or email for pricing

REPLACEMENT BLADE: Please email or call for pricing

REPLACEMENT TOPCAP/LID: Please email or call for pricing

REPLACEMENT MOTOR SINGLE PHASE 115 VOLT: Please email or call for pricing

REPLACEMENT MOTOR THREE PHASE: Please email or call for pricing

REPLACEMENT BEARINGS: Please email of call for pricing

REPLACEMENT SHAFT: Please call or email for pricing

REPLACEMENT BLADE: Please email or call for pricing

REPLACEMENT TOPCAP/LID: Please email or call for pricing

 

 

 

 

All fans include a one year warranty. Must have certification or license to install electrical components and products. All information, and proven certifications must be emailed to [email protected] Warranty does not cover freight, damages to outside parts, components, or ramifications of defective parts external to the fan. Warranty does not cover labor or additional cost associated with installation, repair, or injury.