Description
CONTACT CUSTOMER SERVICE FOR PRICE AND LEAD TIME.
!!! INSURE THE APPLICATION TESTS FOR THE CORRECT VOLTAGE, CYCLE, AND PHASE BEFORE PURCHASING !!!
Three phase applications available as well
30TUD Upblast Roof Fan TRITON® Steel Propeller Direct Drive
TUD30
REPLACEMENT MOTOR SINGLE PHASE 115 VOLT: Please email or call for pricing
REPLACEMENT MOTOR THREE PHASE: Please email or call for pricing
REPLACEMENT BEARINGS: Please email of call for pricing
REPLACEMENT SHAFT: Please call or email for pricing
REPLACEMENT BLADE: Please email or call for pricing
REPLACEMENT TOPCAP/LID: Please email or call for pricing
CONTACT CUSTOMER SERVICE FOR PRICE AND LEAD TIME.
TUD
Upblast Roof Fan
TRITON® Steel Propeller
Direct Drive
- TUD is a standard unit that utilizes the COOK TRITON® Series extruded aluminum airfoil propeller.
- TUD is a direct drive unit available in 8 sizes from 20 to 60 inches. Performance ranges from 3,400 to 60,000 CFM with static pressures from 0 to 1 inch.
Description:Fan shall be a direct drive upblast propeller roof fan.
Certifications: Fan shall be manufactured at an ISO 9001 certified facility. Fan shall be listed by Underwriters Laboratories (UL 705) and UL listed for Canada (cUL 705).
Construction: The fan shall be of bolted and welded construction utilizing corrosion resistant fasteners. The motor and propeller shall be mounted on a minimum 10 gauge welded steel power assembly inside a minimum 14 gauge welded steel housing. The housing shall be continuously welded to a minimum 14 gauge steel base with integral venturi and continuously welded curb cap corners. Fan shall have hinged butterfly discharge dampers of aluminum or steel construction with a rain gutter to prevent rain infiltration. Dampers shall be protected by a continuously welded steel windband of
minimum 18 gauge steel with minimum one inch flanges for maximum strength and rigidity. Unit shall bear an engraved aluminum nameplate and shall be shipped in ISTA Certified Transit Tested Packaging.
Coating: All steel fan components shall be Lorenized® with an electrostatically applied, baked polyester powder coating. Each component shall be subject
to a five stage environmentally friendly wash system, followed by a minimum 2 mil thick baked powder finish. Paint must exceed 1,000 hour salt spray under ASTM B117 test method.
Propeller: Propeller shall be a high-efficiency fabricated steel design with blades securely fastened to a minimum 7 gauge steel hub. The hub shall be keyed and locked to the motor shaft utilizing two setscrews or a taperlock bushing.Propeller shall be balanced in accordance with AMCA Standard 204-05, Balance Quality and Vibration Levels for Fans.
Motor: Motor shall be Nema design B with class B insulation rated for continuous duty and furnished at the specified voltage, phase and enclosure.
